Hard Floor To Carpet Tramline Z Bar

from  £22.99

RRP: £25.99

The TramlineZ is available in 2 recess options: 1mm and 3mm so that you can fit your flooring into it and is a perfectly matched joiner from carpet to hard flooring. Used for stretch-fit carpets, medium height, to LVT and WPC/SPC 8-6mm and 8mm Laminate.

TramlineZ (1mm recess) is for use with WPC/SPC (any multi-layered flooring) by peeling off the top layer.
TramlineZ (3mm recess) for LVT 2-3mm and Floating LVT/Click 4-5mm and Laminate flooring by planning down to 3mm.

Includes pre-attached adhesive tape.
Includes MDF spacer 40cm long. Cut in short lengths and place under nail holes to raise base.
Consider underlay and carpet thickness as this will have a bearing on the heights.

The trim should start a few millimetres above the height of the flooring to allow 2-4mm level nap down to give the carpet a firm grip on the pins.
Use the MDF strips provided to raise the base 3mm.
Use a block of wood wrapped in carpet and then gentle hammer down the trim making it level, never at an angle.

Choice of standard finishes: Ali Brass, Ali Antique, Ali Chrome & Ali Black
Choice of length:  90cm and 180cm
Choice of profiles: Ali TramlineZ 1mm recess and Ali TramlineZ 3mm recess.

Stock Code: Ali Tramline Z Bar

Free UK Delivery *
over £75
Secure Checkout
Visa / MasterCard / PayPal
Simple To Install
Order By Phone
0330 113 4909

Select Option

Select Finish

Antique Brass

Select Length

Select length as either centimetres or inches:



Review and Purchase